One UTC Sentinel - Multi urinal coverage
Owner can determine water savings : UTC Controller is (field) programmable
Virtually vandal proof as all components can be located out of the room space
Quick and easy installation - Safe low voltage wiring
Eliminates odor problems as the urinals will always be flushed
Automatic 24 hour inactivity flush keeps traps primed
Excellent for high volume restrooms

 

APPLICATIONS/MODEL NUMBERS


Transforms a continuous timed operation to a sensor activated one
Easy retro-fit of existing installation as a tank and piping can remain in
    its place
Up to 95% water savings of current system results in a quick pay back period


Transforms manual flush valves to a sensor activated system without the
    expenses of buying and installing individual sensor type flush valves
Virtually a maintenance free system. Troublesome diaphragms assemblies
    of the existing flush valves are removed.


Initial savings - One (1) UTC Sentinel ® is more economical than a group of
    individual sensor activated flush valves
Normal flush valve maintenance is eliminated
Low cost maintenance - year after year
Rear supply urinals can be used (no exposed piping to vandalize)
CSA Approved. If required, local approval should be verified.
UTC SENTINEL® COMPONENTS


In-depth research and design along with leading edge technology has produced a sophisticated unit capable of controlling multiple urinals simultaneously. Easy push button programming and a large LED display add to user convenience. Flexible programming options allow for settings to accommodate any restroom environment. It can be remotely mounted in any convenient location out of view of restroom patrons, including adjacent spaces such as the pipe chase, janitor closets, mechanical rooms or above the ceiling. The controller displays a continuous operations status and tracks the number of flushes to aid in consumption analysis. The controller is assembled following ISO 9001 protocols in one of the most modern electronics facilities in the world.
 


The UTC Sentinel® includes a high quality passive infrared motion sensor which continuously monitors the urinals for use. The sensor activation range can be "fine tuned" to ensure activation only after urinal use, eliminating false flushes. This sensor can be surface mounted on the ceiling or recessed behind a return air grille in the ceiling for increased vandalism resistance.  

The UTC Sentinel® utilizes a high quality solenoid valve.  Its slow activation feature eliminates water hammering.  Extra-long service life and low maintenance are features of the heavy-duty design and construction.  The solenoid valve is installed in the main urinal supply line for new construction and flush valve retrofits, or in the tank for urinal tank retrofits.

 

UTC SENTINEL® STAGES OF OPERATION
 

 

 





 


Programmable from 1 hour to 99 hours
The function of this stage is to flush the urinals after a programmed period of time - even if the motion sensor is not activated.
 
Programmable from 1 to 99 minutes
The purpose of this stage is to prevent the urinals from being flushed after each and every time the urinal is used.
 
Programmable from 1 to 99 seconds
This stage determines how long the solenoid valve will stay open to properly flush the urinals.

Note:  Once set, each of these three programmed values is retained in the memory of the UTC Sentinel® controller. Should there be a power interruption, these times will be stored in memory until the power resumes.
 

 
FINAL OVERVIEW


Stage 1 is the UTC Controller default position.

When a person stands in front of a urinal, the overhead passive infrared motion sensor recognizes the user and sends a signal to the remote UTC Sentinel® Controller and Stage 2 countdown is initiated.

Stage 2 - Delay before flushing begins.

NOTE: Stage 2 countdown period is NOT interrupted should other urinal users arrive during the countdown.

When Stage 2 countdown reaches zero, then the controller initiates Stage 3.

Stage 3 Flushing of the urinals.

Stage 3 opens the solenoid valve and flushes the urinals thoroughly.

Note:  The length of the flush is determined in the field during the installation of the UTC Controller.  Simple programming instructions are provided.  Factory assistance is also available if needed.

After flushing, the UTC Controller returns to Stage 1.

On-Line ordering of CRP products is currently being developed.

In the meantime, the UTC SENTINEL® can be ordered by phone, email, fax or through the Contact Us page.

Model # Description Trade Price
UTCS1A UTC Sentinel®Urinal Tank Retro-Fit $ 1275.00
  with 1/2" solenoid valve
UTCS1B UTC Sentinel®Flush Valve Retro-Fit Kit  
  with (3) flush valve handle caps and  
  with 1/2" solenoid valve $1275.00
  with 3/4" solenoid valve $1325.00
FVP1 Additional flush valve handle caps $34.00
UTCS1C UTC Sentinel® - New Construction Kit  
  with 3/4" solenoid valve $1325.00
  Note each kit includes: Return Air Grille (white)  
    Motion Sensor  
    UTC Controller  
    Solenoid Valve (specify size requirements)  
    Installation instructions  

Shipping charges (including Canadian import duties) are included in the pricing.
Prices are subject to change. Please confirm pricing with CRP when ordering.
Minimum order - $50.00 Net